Bagged desiccant for vehicle headlights
| Specification and Model (Part Number) | HX-1g | HX-2g | HX-3g | HX-5g | HX-10g |
| Product reference sizemm (a*b) |
45*25 |
60*25 | 55*45 | 70*60 | 100*70 |
|
thickness of desiccant before horizontal hygroscopic absorption(e) |
≤3mm |
≤4mm |
≤5.4mm |
≤5mm |
≤6mm |
|
thickness of horizontal saturated desiccant(f) |
≤6mm |
≤7mm |
≤58mm |
≤9mm |
≤10mm |
|
Vertical placement of desiccant thickness before moisture absorption(e) |
≤4mm |
≤7mm |
≤7mm |
≤9mm |
≤10mm |
|
Vertical absorption of saturated desiccant thickness(f) |
≤7mm |
≤512mm |
≤512mm |
≤515mm |
≤16mm |
| way to install | Back glue | Back glue | Back glue | Back glue | Back glue |
| Hygroscopicity of HX-series products | >150% | >150% | > 150% | > 150% | >150% |
| Sealing method | trilateral seal | trilateral seal | trilateral seal | trilateral seal | trilateral seal |
| quality guarantee period | one year | one year | one year | one year | one year |
| Specification and Model (Part Number) | HX-1g | HX-2g | HX-3g | HX-5g | HX-10g |
| Product reference size (mm) (a*b) |
45*25 |
60*25 |
55*45 |
70*60 |
100*70 |
| Thickness of desiccant before horizontal hygroscopic absorption (e) |
≤3mm |
≤4mm |
≤54mm |
≤5mm |
≤6mm |
| Horizontal hygroscopic saturated desiccant thickness (f) |
≤6mm |
≤7mm |
≤58mm |
≤9mm |
≤10mm |
| Vertical thickness of desiccant (e) before hygroscopic absorption |
≤4mm |
≤7mm |
≤57mm |
≤9mm |
≤510mm |
| Vertical thickness of hygroscopic saturated desiccant (f) |
≤7mm |
512mm |
≤512mm |
≤515mm |
≤16mm |
| way to install | Back glue | Back glue | Back glue | Back glue | Back glue |
| HX－product series moisture absorption rate | >150% | >150% | > 150% | > 150% | >150% |
| Sealing method | trilateral seal | trilateral seal | trilateral seal | trilateral seal | trilateral seal |
| quality guarantee period | one year | one year | one year | one year | one year |
The desiccant is bagged magnesium chloride desiccant.The outer packaging is made ofspecial PET material.It adopts automatic filling and hot welding process and is fixed and adhered to the car lamp in the form ofback adhesive.
Product features:
1.High moisture absorption rate, low moisture discharge fate
2.No return phenomenon。
Note：
1.Before use, check whether the packaging seal is intact and whethe「there is damage
2.Use under normal temperature and humidity conditions, After opening the package, it is recommended to use it within 1-2 hours, otherwise the hygroscopic property will decay
3.Ifthe drying bag in the package cannot be used up at one time, the package should be re-sealed in time
4.Whenusing thedrying bag,thestress ofthe drying bag can not be folded, squeezed or kneaded, and the drying bag can not be thrown at will, so as to avoid the drying bag being damaged and leaking or broken
5.Installation Guide:Ensure that the installation surface is dry,smooth and clean, free of oil stains, particles or other dirt.It is recommended to wipe and clean the surface appropriately.Manually peel offthe release film ofthe double-sided tape,install the bagged desiccant,and press it directly twice after installation to ensure a firm bond between the product and the shell. Wait for 24 hours before starting to use or testto avoid the tape's adhesion being affected by external force during the process.Avoidoperating in an environment below10°C, as this may affect the adhesive performance ofthe tape and pose a risk of detachment.
6.The drying bag is stored in a cool and dry room, pay attention to ventilation, avoid rain and snow immersion, sun exposure
All technical information and recommendations are based on the company's previous experience and test results. MianJunprovides this information to the best of its knowledge without any legal liab小ty.The customer should verify the suitability and availability of its specific application and」udge the performance of the product only when all the necessary operational data is available.This Code of Practice is subject to change withoutnotice。