Leave Your Message

Breathable Plastic Locking Nut Waterproof IP 68 Electronic Enclosure Vents

  • PRODUCT NAME Screw-In Vent Valve
  • PRODUCT MODEL DCCK-LWVV_M101.5-10
  • MEMBRANE MODEL DCCK-TB20WO-E

PHYSICAL PROPERTIES

REFERED TEST STANDARD

UNIT

TYPICAL DATA

Thread SPEC

/

/

M10*1.5-10

Valve Color

/ /

Black/White/Gray

Valve Material

/ /

Nylon PA66

Seal ring Material

/ /

Silicone Rubber

Membrane Construction

 

/

 

/

PTFE/PET non-woven
Membrane Surface Property

/

/

Oleophobic/Hydrophobic

Typical Air Flow Rate

ASTM D737

ml/min/cm2 @ 7KPa

2000

Water Entry Pressure

ASTM D751

KPa dwell 30 sec

≥60

IP Grade

IEC 60529

/

IP67/IP68
Water Vapor Transmission Rate

GB/T 12704.2

(38℃/50%RH)

g/m2/24h >5000

Service Temperature

IEC 60068-2- 14

-40℃ ~ 125℃

ROHS

IEC 62321

/

Meet ROHS Requirements

PFOA & PFOS US EPA 3550C & US EPA 8321B   PFOA & PFOS Free

Installation Notes

1) The Installation hole size adopts the general standard of M10*1.5.

2) It is recommended to fix the cavity with nuts when the wall thickness of the cavity is less than 3mm.

3) When it needs to install two breathable valves, it’s suggested that the valves should be installed in opposite directions to reach the air convection effects.

4) Suggested installation torque is 0.8N.m, lest torque too much to affect the product performance.

Changing harsh environmental conditions cause seals to failand allow contaminants to damage sensitive electronics.

DCCK® Screw-In Breathable Valve effectively equalize pressure and reduce condensation in sealed enclosures, while keeping out solid and liquid contaminants. They improve the safety, reliability and service life of outdoor electronic devices. DCCK® Screw-In Breathable Valve is designed to provide Hydrophobic/Oleophobic protection and withstand the mechanical stresses of challenging environments.

Shelf life is 5 years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.

All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.

All technical information and advice given here is based on Aynuo’s previous experiences and test results. Mianjungives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.

Breathable plastic locking nut waterproof IP 68 electronics enclosure vents. Designed to provide superior protection for electronic components in harsh environments, these waterproof and breathable products are the perfect solution to ensure the longevity and reliability of electronic equipment.

Our vents are made from high-quality, breathable plastic that allows air to flow freely while keeping water, dust, and other contaminants out. This unique design ensures your electronic enclosures stay dry and condensation-free even in the most challenging conditions.

Our waterproof vents have an IP 68 waterproof rating, providing a strong barrier against water and moisture, making them ideal for outdoor applications, marine environments and industrial environments. The locking nut mechanism ensures a secure, tight seal, giving you peace of mind that your electronics are fully protected.

In addition to their superior protective properties, our waterproof breathable products are easy to install, saving you time and effort during the assembly process. Its compact size and durable construction make it suitable for use in a variety of electronic enclosures, including control panels, junction boxes and outdoor equipment.

Whether you are designing a new electronics system or looking to upgrade the protection of your existing enclosure, our breathable plastic locking nut waterproof IP 68 electronics enclosure vents are ideal. With its reliable performance and durable construction, you can trust that your electronic components will stay safe and operational in even the harshest environments.

Invest in the longevity and reliability of your electronic devices with our innovative waterproof and breathable products. Our breathable plastic locking nut waterproof IP 68 electronics enclosure vents provide complete protection for your electronics and give you peace of mind.