Chemical Container Creherit High Airflow Hydrophobic PE Vent Liner

PRODUCT NAME Acoustics Vent Membrane
PRODUCT MODEL DCCK-100G10
PRODUCT DESCRIPTION e-PTFE Hydrophobic Acoustics transmission membrane
APPLICATION FEILD Acoustics & Electronics
APPLICATION PRODUCTS Smart Phone, Earphone, Tablet PC, Microphone

Membrane Properties

Transmission Loss Curve

Application

Shelf Life

Note

PHYSICAL PROPERTIES	REFERED TEST STANDARD	UNIT	TYPICAL DATA
Membrane Color	/	/	Grey
Membrane Construction	/	/	ePTFE
Membrane Surface Property	/	/	Hydrophobic
Thickness	ISO 534	mm	0.01
Air Permeability	ASTM D737	ml/min/cm2@7KPa	>8000
Water Entry Pressure	ASTM D751	KPa for 30 sec	>40 KPa
Transmission Loss	Internal Control	dB	< 1 dB
IP Rating (Test I.D.= 2.0mm)	IEC 60529	/	IP67/IP68
ISO Rating (Test I.D.= 2.0mm)	ISO 22810	/	NA
Operation Temperature	IEC 60068-2-14	℃	-40℃ ~ 260℃
ROHS	IEC 62321	/	Meet ROHS Requirements
PFOA & PFOS	US EPA 3550C & US EPA 8321B	/	PFOA & PFOS Free

Protective Self-Adhesive Ventilation Filter Patch Sticker ePTFE Membrane:

Outdoor cabinets are continuously exposed to harsh environments such as heavy rain, dust, sand, and high winds. Under changing environmental conditions, pressure builds up within a sealed cabinet, putting stress on the seals. Over time, pressure can cause seals to fail, allowing water, corrosive liquids, salts, and particles to enter the cabinet and damage the electronics inside. DCCK

Protective vents are the leading solution for protecting sensitive electronic equipment. DCCK guard vents equalize pressure and reduce condensation by allowing air to move freely in and out of sealed cabinets. At the same time, they provide a long-lasting barrier to protect electronic devices from contamination. The result is improved reliability, safety and product life of sealed electronic devices.

Transmission Loss of AYN-100G10 acoustics membrane < 1dB @ 1KHz, and < 3.5 dB in the whole frequency range.

(1) Acoustic Response and IP Grade test part dimension: I.D. 2.0 mm / O.D. 6.0 mm.

(2) The results are tested using a typical digital output MEMS microphone system and self-designed test device in AYNUO laboratory with representative sample size. The design of the device will affect final performance.

This series of membranes can be used in waterproof and acoustics membrane for portable and wearable electronic devices, such as Smart Phone, Earphone, Smart Watch, and Bluetooth Speaker, Alertor etc.

The membrane could provide the device with immersed waterproof protection and minimal sound transmission loss, keeping the device with the excellent acoustics transmission performance.

Shelf life is 5 years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80°F (27°C) and 60% RH.

All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.

All technical information and advice given here is based on Mianjun’s previous experiences and test results. Mianjun gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.