Combination lamp drying box CMD
|
Specifications |
Combination lamp drying box CMD-5g，MIANJUN-Dry-CMD-M-5g |
|
Product Diagram |
|
|
Product size |
|
|
Exploded view |
|
|
Breathing view |
|
|
Installation Type: |
Rotary clamp installation |
|
Installation location |
Behind and below the lamp body |
|
Install in a safe location |
Keep 10mm spacing around CMD |
|
Installation direction |
Horizontal or vertical installation |
The above data are typical data of lamp desiccant，for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on MIANJUN’s previous experiences and test results. MIANJUN gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
|
Product Features: |
Moisture absorption and pressure balance |
|
Membrane properties |
Breathable, waterproof and dustproof |
|
Air permeability |
＞200ml/min/cm²@ 7Kpa |
|
Maximum moisture absorption rate of desiccant (40℃ /90％RH) |
＞200％（Main ingredient: magnesium chloride） |
|
Degassing agent content |
5±0.5g |
|
Moisture absorption method |
Quick suction |
|
Temperature tolerance |
-40℃~120℃ |
|
Operating environment conditions |
Use up within 2 hours after opening, or store in a vacuum seal |
|
Storage conditions |
Store at room temperature in a cool, dry place |
|
Shelf life |
12 months (unopened, sealed storage) |