Customize Size Dustproof Hydrophobic IP 68 adhesive vent sticker
PHYSICAL PROPERTIES |
TEST METHOD |
UNIT |
TYPICAL DATA |
Cap Color |
/ | / | Black |
Cap Material |
/ | / | PP |
Plug Color |
/ | / | Black |
Plug Material |
/ | / | TPE |
Plug Hardness |
ISO 7619-1 | Shore-A |
60~70 |
Membrane construction |
/ | / | PTFE/PO non-woven |
Membrane Surface Property |
/ | / | Hydrophobic |
Typical Air Flow Rate |
ASTM D737 |
ml/min @ 7Kpa (ml/min @ 1Kpa) |
700 (50) |
Water Entry Pressure |
ASTM D751 | KPa dwell 30 sec | ≥80 |
IP Grade |
IEC 60529 | / | IP68 |
| Moisture Vapor Transmission | ASTM E96 | g/m2/24h | >5000 |
Service Temperature |
IEC 60068-2- 14 | ℃ | -40℃ ~ 125℃ |
ROHS |
IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Changing harsh environmental conditions cause seals to fail and allow contaminants to damage automotive lamps. AYN® Plug-in vent cap could effectively equalize pressure and reduce condensation in lamps’ sealed enclosures, while keeping out solid and liquid contaminants. It can increase the safety, reliability and service life of Automotive lamps.
Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80°F (27°C) and 60% RH.
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on Mianjun’s previous experiences and test results. Mianjun gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.