Customize Size Dustproof Hydrophobic IP 68 e-ptfe adhesive vent patch
PHYSICAL PROPERTIES |
REFERED TEST STANDARD |
UNIT |
TYPICAL DATA |
Membrane Color |
/ |
/ |
White |
Membrane Construction |
/ |
/ |
PTFE / PO non-woven |
Membrane Surface Property |
/ |
/ |
Oleophobic & Hydrophobic |
Thickness |
ISO 534 | mm | 0.20±0.05 |
Pore Size |
Internal Method |
um | 1.0 |
Interlayer Bonding Strength |
Internal Method |
N/inch | >2 |
Min Air Flow Rate |
ASTM D737 |
ml/min/cm²@ 7Kpa | >1300 |
Typical Air Flow Rate |
ASTM D737 |
ml/min/cm²@ 7Kpa | 2000 |
Water Entry Pressure |
ASTM D751 |
KPa for 30 sec | >70 |
Moisture Permeability |
ASTM E96 | g/m2/24h | >5000 |
Oleophobic Grade |
AATCC 118 | Grade | ≥7 |
Operation Temperature |
IEC 60068-2-14 | ℃ | -40℃ ~ 100℃ |
ROHS |
IEC 62321 | / | Meet ROHS Requirements |
PFOA & PFOS |
US EPA 3550C & US EPA 8321B | / | PFOA & PFOS Free |
Introducing our latest innovation in protective technology - custom sized dustproof and hydrophobic IP 68 e-ptfe adhesive ventilation patches. This cutting-edge product is designed to provide superior protection for electronics and devices, ensuring they remain safe and functional even in the harshest environments.
Custom sized dustproof hydrophobic IP 68 e-ptfe adhesive ventilation patches are designed to meet the highest standards of dustproof and hydrophobic protection, with an IP 68 rating guaranteeing their effectiveness against the ingress of dust and water. This makes it an ideal solution for a wide range of applications, from outdoor electronics to industrial machinery.
One of the key features of this innovative vent patch is its use of e-PTFE adhesive technology. This advanced material offers a high level of breathability, allowing for efficient exchange of air and gases while maintaining a barrier against contaminants. This ensures that protected equipment can continue to operate at its peak performance without the risk of damage from dust or moisture.
In addition to their superior protective properties, custom-sized dustproof and hydrophobic IP 68 e-ptfe adhesive ventilation patches are also highly customizable in size to perfectly fit a variety of fixtures and equipment. This versatility makes it a versatile solution for a variety of applications, providing reliable protection for electronic devices of all shapes and sizes.
Additionally, the ventilation patch is designed for easy installation and its adhesive backing ensures safe and hassle-free application. This means it can be quickly and easily integrated into existing equipment without the need for complex modifications or additional hardware.
Custom sized dustproof hydrophobic IP 68 e-ptfe adhesive ventilation patches are the result of extensive research and development and their performance is rigorously tested to ensure reliability even in the most demanding conditions. This makes it a trusted choice for aerospace, automotive, marine and other industries where the protection of electronic equipment is critical.
This series of membranes could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage.
The membranes can be used in breathable liner and breathable plug products for chemicals packaging containers，and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.
Shelf life is 5 years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80°F (27°C) and 60% RH.
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on Mianjun’s previous experiences and test results. Mianjun gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
The gas passes through the microporous E-PTFE membrane, diffuses through the pulp layer and is directed to the cap threads. The pulp induction liner requires no holes in the cap and allows optimized venting to minimize steam loss.
Vessel vents for a variety of applications:
DCCK molded components are built for strength and durability. Each part is quality tested before being sealed to the plastic assembly. They are available in a variety of sizes, with capacities ranging from 0.02 liters to 1500 liters, and simply snap or press in. We provide the best combination of liquid resistance and airflow by using expanded polytetrafluoroethylene (ePTFE). Ventilated containers using packaging vents always comply with IMDG CODE and GB/T13508 test standards.
Advantages of PE lining for container vents:
ePTFE membrane has excellent properties such as good chemical inertness, UV resistance, non-flammability and high temperature resistance. It can adapt to climate changes without affecting its breathability. Multiple breathable sizes and ready-to-use components enable packaging improvements without redesign, bottles ( Barrel) anti-corrosion breathable cover bolts are designed with a standardized structure, making the packaging container bottle (barrel) cover simpler in design and more convenient to use.