English
Leave Your Message

LED Lighting Hydrophobic IP 68 Air Permeable Plastic M12*1.5 Waterproof Air Vents

  • PRODUCT NAME Packaging Vent Membrane
  • PRODUCT MODEL DCCK-E10ZO
  • PRODUCT DESCRIPTION e-PTFE Oleophobic and Hydrophobic breathable membrane
  • APPLICATION FEILD Chemicals Packaging
  • APPLICATION RODUCTS Highly-Concentrated Fertilizer or Pesticides, Bacterium Fertilizer, etc

PHYSICAL PROPERTIES

REFERED TEST STANDARD

UNIT

TYPICAL DATA

Membrane Color

/

/

White

Membrane Construction

/

/

PTFE / PO non-woven

Membrane Surface Property

/

/

Oleophobic & Hydrophobic

Thickness

ISO 534 mm 0.18±0.05

Pore Size

Internal Method

um 1.0

Interlayer Bonding Strength

Internal Method

N/inch >2

Min Air Flow Rate

ASTM D737

ml/min/cm²@ 7Kpa >900

Typical Air Flow Rate

ASTM D737

ml/min/cm²@ 7Kpa 1400

Water Entry Pressure

ASTM D751

KPa for 30 sec >90

Moisture Permeability

ASTM E96 g/m2/24h >5000

Oleophobic Grade

AATCC 118 Grade ≥7

Operation Temperature

IEC 60068-2-14 -40℃ ~ 100℃

ROHS

IEC 62321 /

Meet ROHS Requirements

PFOA & PFOS

US EPA 3550C & US EPA 8321B /

PFOA & PFOS Free

This series of membranes could equalize the pressure differentials of chemical containers which caused by temperature difference, altitude changes and releasing/consuming gases, in order to prevent container deformation and liquid leakage. 

The membranes can be used in breathable liner and breathable plug products for chemicals packaging containers,and be suitable for High-concentration Hazardous Chemicals, Low-concentration Household Chemicals, Agricultural Chemicals and other Special Chemicals.

Shelf life is 5 years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80°F (27°C) and 60% RH.

All data above are typical data for the membrane raw material, for reference only, and should not be used as special   data for outgoing quality control.

All technical information and advice given here is based on Mianjun’s previous experiences and test results. Mianjun gives   this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the   suitability and usability in the specific application, since the performance of the product can only be judged when all   necessary operating data are available.

Container Vents and Caps IP 67 Pressure Balanced Aluminum Foil Induction Vent Liners

Product Name Container Vents and Caps IP 67 Pressure Balanced Aluminum Foil Sensing Vent Liners

Material aluminum foil+E-PTFE

Color silver

Body dustproof, waterproof, oleophobic, sealed

Temperature -40℃-125℃

IP rate IP67

Air perm ≥50L/h@70mbar

OEM,ODM service available