Leave Your Message

Lighting Hydrophobic IP 68 Air Permeable Black Plastic M12 Threaded Vent Valve

  • PRODUCT NAME Screw-In Vent Valve
  • PRODUCT MODEL DCCK-LWVV_M161.5-10
  • MEMBRANE MODEL DCCK-TB20WO-E

PHYSICAL PROPERTIES

REFERED TEST STANDARD

UNIT

TYPICAL DATA

Thread SPEC

/

/

M16*1.5-10

Valve Color

/ /

Black/White/Gray

Valve Material

/ /

Nylon PA66

Seal ring Material

/

/

Silicone Rubber

Membrane Construction

/

/

PTFE/PET non-woven
Membrane Surface Property

/

/

Oleophobic/Hydrophobic

Typical Air Flow Rate

ASTM D737

ml/min/cm2 @ 7KPa

2000

Water Entry Pressure

ASTM D751

KPa dwell 30 sec

≥60

IP Grade

IEC 60529

/ IP67/IP68
Water Vapor Transmission Rate

GB/T 12704.2 (38℃/50%RH)

g/m2/24h >5000

Service Temperature

IEC 60068-2- 14

-40℃ ~ 125℃

ROHS

IEC 62321

/

Meet ROHS Requirements

PFOA & PFOS US EPA 3550C & US EPA 8321B   PFOA & PFOS Free

Installation Notes

1) The Installation hole size adopts the general standard of M16*1.5. 

2) It is recommended to fix the cavity with nuts when the wall thickness of the cavity is less than 3mm. 

3) When it needs to install two breathable valves, it’s suggested that the valves should be installed in opposite directions to reach the air convection effects. 

4) Suggested installation torque is 0.8N.m, lest torque too much to affect the product performance.

Changing harsh environmental conditions cause seals to failand allow contaminants to damage sensitive electronics.

DCCK® Screw-In Breathable Valve effectively equalize pressure and reduce condensation in sealed enclosures, while keeping out solid and liquid contaminants. They improve the safety, reliability and service life of outdoor electronic devices. DCCK® Screw-In Breathable Valve is designed to provide Hydrophobic/Oleophobic protection and withstand the mechanical stresses of challenging environments.

Shelf life is 5 years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.

All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.

All technical information and advice given here is based on Mianjun’s previous experiences and test results. Mianjun gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.

The illuminated hydrophobic IP 68 breathable black plastic M12 threaded vent valve. This cutting-edge vent valve is designed to provide superior protection for electronics and equipment by effectively managing pressure differentials and preventing the ingress of water, dust and other contaminants.

The light trap vent valve features a sturdy construction with a black plastic housing and M12 thread design to ensure easy and secure installation. Its IP 68 rating ensures excellent water and dust resistance, making it suitable for a wide range of outdoor and industrial applications. Whether it’s automotive, marine or outdoor electronics, this exhaust valve is designed to withstand harsh environmental conditions and maintain optimal performance.

One of the main highlights of this vent valve is its hydrophobic and breathable design, which allows air to pass through freely while being waterproof and moisture-proof. This unique feature ensures that the internal components of electronic devices stay dry and functional even in the most challenging environments. In addition, the pressure equalization capabilities of the exhaust valve help prevent condensation and maintain the integrity of the sealed enclosure.

Lighting Trap Vent Valves focus on reliability and longevity and are designed to provide consistent performance over an extended service life. Its durable construction and advanced sealing technology provide a reliable solution to protect sensitive electronic equipment from water and contaminants.

the Illuminated Hydrophobic IP 68 Breathable Black Plastic M12 Threaded Vent Valve sets a new standard in venting solutions, providing unparalleled protection and performance in demanding environments. Whether you are looking to protect outdoor electronics, industrial equipment or automotive components, this vent valve is ideal for ensuring the longevity and reliability of your valuable assets. Illuminated trap vents keep your electronics safe and functioning properly no matter the conditions.