Wallwasher Housing LED Standard Size M12 Hydrophobic IP 68 Plastic Air Vent Valve
| PHYSICAL PROPERTIES | REFERED TEST STANDARD | UNIT | TYPICAL DATA |
| Thread SPEC | / | / | M8*1.25-10 |
| Valve Color | / | / | Black/White/Gray |
| Valve Material | / | / | Nylon PA66 |
| Seal ring Material | / | / | Silicone Rubber |
| Membrane Construction | / | / | PTFE/PET non-woven |
| Membrane Surface Property | / | / | Oleophobic/Hydrophobic |
| Typical Air Flow Rate | ASTM D737 | ml/min/cm2 @ 7KPa | 2000 |
| Water Entry Pressure | ASTM D751 | KPa dwell 30 sec | ≥60 |
| IP Grade | IEC 60529 | / | IP67/IP68 |
| Water Vapor Transmission Rate | GB/T 12704.2 (38℃/50%RH) | g/m2/24h | >5000 |
| Service Temperature | IEC 60068-2- 14 | ℃ | -40℃ ~ 125℃ |
| ROHS | IEC 62321 | / | Meet ROHS Requirements |
| PFOA & PFOS | US EPA 3550C & US EPA 8321B | PFOA & PFOS Free |
Installation Notes
1) The Installation hole size adopts the general standard of M8* 1.25.
2) It is recommended to fix the cavity with nuts when the wall thickness of the cavity is less than 3mm.
3) When it needs to install two breathable valves, it’s suggested that the valves should be installed in opposite directions to reach the air convection effects.
4) Suggested installation torque is 0.8N.m, lest torque too much to affect the product performance.
Featuring a sleek and modern design, this wall washer housing is equipped with state-of-the-art LED technology to ensure bright, even lighting with minimal energy consumption. The standard size M12 ensures compatibility with a wide range of luminaires, making it easy to integrate into existing lighting systems. The case has an IP 68 waterproof rating to withstand harsh environments and is suitable for both indoor and outdoor use.
One of the outstanding features of the wall washer housing LED standard size M12 is its innovative plastic exhaust valve. This feature allows for efficient heat dissipation, ensuring optimal performance and longevity of the LED lights. In addition, the vent valve helps prevent condensation from building up, further increasing the durability and reliability of the housing.
Wall Washer Housing LED Standard Size M12 has been designed with versatility in mind, offering a range of mounting options for a seamless installation. Whether you prefer surface mount, flush mount, or adjustable tilt, this enclosure can be customized to fit your specific lighting needs.
In addition to excellent performance and durability, the wall washer housing LED standard size M12 is also environmentally friendly, has a long service life and requires low maintenance. This makes it a cost-effective and sustainable lighting solution for any project.
the wall washer housing LED standard size M12 is a game changer in the field of lighting technology. This product sets new standards in wall washer housings with its advanced functionality, high-quality construction and energy-saving design. Experience the difference with the Wall Washer Housing LED Standard Size M12 and take your lighting design to new heights.
Changing harsh environmental conditions cause seals to failand allow contaminants to damage sensitive electronics.
DCCK® Screw-In Breathable Valve effectively equalize pressure and reduce condensation in sealed enclosures, while keeping out solid and liquid contaminants. They improve the safety, reliability and service life of outdoor electronic devices. DCCK® Screw-In Breathable Valve is designed to provide Hydrophobic/Oleophobic protection and withstand the mechanical stresses of challenging environments.
Shelf life is 5 years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH.
All data above are typical data for the membrane raw material, for reference only, and should not be used as special data for outgoing quality control.
All technical information and advice given here is based on Mianjun’s previous experiences and test results. Mianjun gives this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application, since the performance of the product can only be judged when all necessary operating data are available.
Applications of plastic M12 screw-in breather plugs:
solar panel
● Junction Box
● Inverter
● CPV module
● String combiner box
Features of plastic M12 screw-in breather plug:
● Diffuse moisture
● Prevent condensation
● Quickly balance pressure
● Protection from dust, rain and other
environmental pollutants
● Protects against corrosion and electrical short circuits
● Reduce sealing pressure
● Protection class up to IP67/68